Goretti Ganzo: "Efficiency is not only sustainability, it is also industrial competitiveness"

Country Manager. Industrial Heat - Spain at Robert Bosch Spain

5 min
Goretti Ganzo Bosch
Redacció
22/11/2026 - 00:07 h

Industrial decarbonization begins with understanding how much energy production processes actually need, how it is used, and where losses occur. Goretti Ganzo Bustamante, country manager for Industrial Heat at Bosch in Spain, explains why energy efficiency must be the starting point for this transformation and how data, control systems, and technical expertise contribute to optimizing facilities and guiding technological and investment decisions.

Why should industrial decarbonization start with efficiency?

— Because the energy we do not consume is energy we do not have to buy, generate, or decarbonize. Before replacing a technology or changing the energy source, we must understand how much energy the process really needs, how we use it, and where the losses occur. Sizing, modulation, heat recovery, condensate return, blowdown, water treatment, or control strategy can have a direct impact on consumption. Optimizing these elements reduces emissions and operating costs. Therefore, efficiency is not just sustainability, but also industrial competitiveness.

Why does the efficiency of a piece of equipment not always reflect the actual efficiency of an installation?

— Because nominal efficiency reflects the equipment's behavior under specific conditions, while an industrial installation operates under variable conditions. A boiler can achieve excellent performance at its design point, yet the entire system may operate far from its optimal point. Real efficiency depends on partial loads, demand peaks, start-ups and shutdowns, standby periods, energy recovery, condensate return, operating pressure, and control strategy. It is not enough to analyze the boiler's maximum performance: we must study how steam or heat is generated, distributed, and used throughout all operating hours.

Two high-efficiency Bosch UL-S steam boilers installed in an industrial plant, combined with a thermal deaerator for boiler feedwater supply.

How important is it to know the actual steam or heat demand curve?

— The demand curve makes it possible to know how much steam or heat the process requires, at what times, and with what variability. It is essential for correctly sizing the installation, selecting the appropriate modulation range, and avoiding both oversizing and a lack of capacity during peak demand. It also allows for identifying base loads, brief spikes, variations according to work shifts, seasonality, and unproductive periods. This information helps in deciding whether it is advisable to use a single boiler, several units in cascade, or a combination of technologies. Without knowing the actual demand, we run the risk of designing an installation that is efficient on paper, but inefficient during the thousands of hours in which it operates below its maximum load.

What information can new control systems provide about the actual behavior of an installation?

— The new control systems allow for the visualization and analysis of operational data and provide transparency regarding how energy is generated and used. They can show load profiles, consumption trends, demand peaks, periods of low utilization, start-ups and shutdowns, deviations from expected values, and partial-load behavior. This historical view, and not just an instantaneous one, allows for the detection of patterns that would otherwise go unnoticed, the comparison of periods, and the verification of whether the introduced changes produce the expected result. Thus, control stops being just a tool for operating the equipment and becomes a source of knowledge about the actual performance of the installation.

How can we convert this data into energy decisions and improvements?

— Data must be integrated into a structured process: measure, visualize, analyze, understand, act, and verify. First, we must ensure that the relevant variables are measured correctly. Then, it is necessary to interpret the trends and relate them to production and operating conditions. Technical expertise makes it possible to determine whether a deviation is due to the process, an improvable regulation, a maintenance need, or a design limitation. From there, setpoints can be adjusted, the boiler operating sequence can be modified, waiting times reduced, modulation improved, condensate return increased, or residual energy recovered. Finally, we must measure again to verify the savings.

How can we decide which technology or combination of technologies is appropriate for each industrial process?

— The decision must start from the process, not from a previously selected technology. First, the already optimized demand is analyzed: temperature, pressure, load profile, required continuity, consumption peaks, and production criticality. Then, the available energy sources are studied, both currently and in the medium term, along with their costs, emissions, and the necessary infrastructure. In some cases, an electric boiler will be able to cover certain periods; in others, heat recovery, biogas, renewable fuels, high-efficiency thermal generation, or a hybrid solution will provide more value.

How important are flexibility and the possibility to evolve in facilities that can remain operational for decades?

— They are fundamental because, throughout the useful life of an installation, production needs, energy prices, regulations, and available technologies will change. A solution that is adequate today may cease to be so if the demand profile changes, the plant's capacity increases, or new energy sources appear. Therefore, an installation should not be valued solely for its current efficiency, but also for its capacity to incorporate new technologies, modernize control systems, and combine different sources. The transformation can follow a progressive roadmap: understand, optimize, recover, integrate, decarbonize, and evolve.

What does Bosch bring with its experience in different industrial installations and applications?

— Our experience in each installation and in each application provides knowledge about how systems behave under real conditions. The experience accumulated in design, manufacturing, integration, commissioning, operation, maintenance, optimization and modernization allows Bosch to go beyond the theoretical performance of the equipment. This knowledge makes it easy to recognize patterns, anticipate risks and understand that a solution valid for one industry may not be the most suitable for another, even if both require steam or heat.

How can this technical knowledge be transferred to the optimization and evolution of an existing installation?

— The first step is to analyze the current operation and contrast it with the actual needs of the process. We must check if the demand profile has changed, if there are prolonged periods of partial load operation, if consumption can be reduced, if more energy can be recovered, or if the control strategy can be improved. It is also necessary to evaluate which components can be modernized and whether it makes sense to electrify part of the demand or incorporate other energy sources. Technical knowledge allows us to interpret the data, prioritize measures, and avoid isolated actions that do not solve the root cause of the problem.

What does it really mean to support the client throughout the entire life cycle of their installation?

— It means that the relationship with Bosch does not end with delivery or commissioning. Accompanying the client implies being present at different stages: design, integration, operation, maintenance, analysis, optimization, modernization, and evolution. Maintenance guarantees availability and safety, but support must go further: analyzing behavior, interpreting data, detecting opportunities, proposing improvements, and verifying results. It also means helping the client build a realistic roadmap, with staggered investments that are compatible with the continuity of the process.

What factors must an industrial company take into account when deciding which technologies to invest in to improve efficiency and advance in decarbonization?

— The company must know its actual thermal demand, load profile, required temperatures and pressures, operating hours, consumption peaks, and the criticality of the process. Afterwards, it must identify losses and take advantage of efficiency opportunities related to modulation, heat recovery, condensates, purges, water treatment, control, and operating conditions. It must also analyze the current and future availability of electricity, gas, biogas, renewable fuels, or other sources, as well as their costs, emissions, and infrastructure. The decision must take into account the investment, the total cost of ownership, safety, reliability, maintenance, regulation, scalability, and energy dependence. At Bosch, we help to make these decisions.

stats