Saving energy also has a return
Energy saving certificates allow recovering part of the investment in efficiency actions and introduce an economic incentive to accelerate the transformation of production processes
-
CAT -
CAST
Investments in energy efficiency often have to compete with other business priorities. Renewing machinery, improving cooling, or recovering heat from a production process reduces consumption, but requires an initial investment and amortization periods that can delay the decision. Energy savings certificates (CAEs) aim to help change this situation: they allow for giving an economic value to the energy that a company stops consuming and recovering a part of the investment intended to achieve it.
The mechanism converts savings into an asset that can generate economic return. Companies obtain additional compensation for energy improvements, while energy companies have a way to credit their savings targets. This incentive can make industrial investments more attractive.
From savings to economic compensation
The energy savings certificate system was launched in Spain in 2023, with the approval of Royal Decree 36/2023. A CAE certifies one kilowatt-hour of annual final energy savings. Electricity and gas trading companies and wholesale operators of petroleum products and liquefied petroleum gases have annual energy saving obligations. Part of these obligations can be met through the acquisition and settlement of certificates generated by efficiency actions.
For the company carrying out the improvement, this means it can transfer the rights to the savings achieved to a third party in exchange for financial compensation. The value depends on the volume of energy saved, the project's characteristics, and the conditions negotiated between the parties. There is no fixed rate applicable to all actions: the compensation is agreed upon in the market and may vary depending on the type of project and the costs necessary to convert the savings into a valid certificate.
Unlike a conventional subsidy, the CAE does not directly remunerate the purchase of equipment or the investment made, but rather the energy result derived from it. It also does not necessarily cover a specific part of the budget: it is a complementary income that is added to the savings the company will already obtain on its energy bill. To assess its interest, the cost of the technology, the expected savings, the price that can be obtained for the CAEs, and the verification and management expenses must be incorporated into the calculation.
Catalonia, with industry among the leading sectors
In Catalonia, the Catalan Energy Institute (ICAEN) is the regional manager of the system. Among its functions are reviewing files, validating actions, and processing the issuance of certificates, which are registered in the state registry.
In January 2025, ICAEN reported that 180 actions had been registered, with an annual energy saving of 202.8 GWh. Of these actions, 94 corresponded to the industrial sector, 54 to the tertiary sector, 22 to the residential sector, and 10 to singular projects. The industry therefore represented more than half of the certified actions in that balance sheet.
To follow the evolution of the system, ICAEN publishes an interactive map with data by region, sector, and type of intervention. At the state level, the ministry announced in September 2026 that more than 9,400 CAE applications had been received, of which about 7,000 had been resolved favorably, with a certified saving exceeding 7,700 GWh. The figures show that the mechanism has gained scale, although state data cannot be directly transferred to Catalonia: to know the Catalan weight, it is necessary to consult the territorialized statistics.
Which improvements can generate certificates?
The scope of application for Energy Savings Certificates (CAE) is broad. The national catalog includes more than a hundred standardized actions in sectors such as industry, services, housing, transport, and agriculture. In the industrial field, opportunities include the renewal of equipment, the optimization of thermal processes, and the improvement of facilities that concentrate a significant part of energy consumption.
Waste heat recovery is another path to savings: in certain processes, the thermal energy that escapes through gases or cooling circuits can be used to heat water or meet the needs of other production stages. Feasibility depends on the available temperature, the continuity of the process, and the match between the recovered energy and the demand.
Cold and refrigeration systems constitute another field of action, especially in sectors such as food, chemicals, or the pharmaceutical industry. Equipment renewal and circuit optimization can reduce electricity consumption without compromising process requirements. There is also room for improvement in motors, pumps, and air compressors. Replacing obsolete machinery, adjusting its power to real needs, incorporating frequency drives, or detecting leaks in compressed air networks are measures that can generate significant savings.
In all cases, it is necessary to certify and quantify the savings in accordance with established methodologies. It is not enough to install more efficient technology: one must demonstrate what reduction in consumption has been achieved with respect to the initial situation and that it meets the system's criteria.
A procedure with various agents
The system distinguishes between standardized actions, included in a catalog with common calculation methodologies, and singular ones, which require specific justification. In both cases, it is necessary to document the initial situation and verify the savings achieved before requesting the issuance of the certificate.
Several agents are involved: obligated subjects, that is, energy companies with annual savings targets; delegated subjects, who can manage certificates on their behalf; the owners of the savings; the verifiers, and the engineering and energy service companies that advise the promoters.
For industry, knowing these figures is important because it is not always necessary to manage all procedures directly. It is possible to negotiate the transfer of savings and rely on intermediaries to prepare the file or find a buyer. However, it is essential to compare the economic conditions, the rights that are transferred, and the management and verification costs that may be involved in the operation.
The challenge of reaching SMEs
One of the main challenges of the system is to ensure that it is accessible to companies of different sizes. Large industries usually have energy or maintenance departments that can identify projects and prepare their documentation. In contrast, in many small and medium-sized enterprises, these functions fall to smaller teams, which must prioritize production and daily management.
It is also necessary for companies to know the mechanism before deciding on investments. Incorporating the possibility of generating EEOs (Energy Efficiency Obligations) from the beginning allows for assessing the overall return and preparing the necessary documentation.
A market that is evolving
The growth of the system has also opened the debate on how to expand its scope and direct incentives towards actions that may have more difficulty accessing the market. In September 2026, the ministry presented a proposal to incorporate energy-saving auctions that complement the current mechanism. The initiative proposes channeling resources into areas such as electric mobility, building renovation, small and medium-sized enterprises, or certain vulnerable groups. It is a regulatory proposal in progress, not a fully deployed instrument.
The ESCs do not replace subsidies nor do they solve the industry's investment needs on their own. Nor do they automatically turn any equipment renewal into a profitable operation. Their value lies in incorporating an additional incentive for projects that generate verifiable final energy savings and that, without this return, might otherwise have more difficulty moving forward.
Reducing energy demand improves the use of resources: consuming less to manufacture the same product can reduce costs, dependence on supplies, and emissions associated with consumption. Efficiency complements electrification and renewables; a facility that has already optimized its consumption may need less power to electrify processes or dimension a renewable installation.
For the Catalan industry, energy savings certificates open up a concrete possibility: that a part of the investment effort intended to consume less energy may have an additional return. In a scenario in which efficiency increasingly conditions costs and competitiveness, converting savings into economic value can help place these actions among the strategic decisions of companies. The energy transition also happens here: not only by producing energy in a different way, but by needing less of it.